HOW-TO · Fulfillment

So erstellen Sie WMS-Picklisten für E-Commerce-Aufträge

A WMS pick list is more than a printable sheet. For online sellers, it is the daily instruction set that decides which Shopify, WooCommerce, bol.com, Amazon, Kaufland or B2B orders are safe to release, which shelves a picker visits, which SKU is scanned, and which parcel reaches the carrier before cutoff. ChannelDock’s Pick List settings let you turn that control into a repeatable workflow.

Gruppieren
orders by risk and cutoff
Routen
SKUs by bin and aisle
Prüfen
scan before pack
Pickliste #1428Bereit
Routen A12 orders
A-01 · SKU-BLK-426 pcs
A-03 · EAN 871...4 pcs
B-07 · KIT-SOCK-22 kits

The best pick list tells the picker where to walk, what to scan, and when to stop.

Most ranking pick-list articles explain fields on a document. The operational gap is control: when to release work, how to group it, and how to prevent the wrong item from reaching the packing bench.

Weniger Laufwegebin-sorted routes
Weniger Fehlgriffescan checks
Cut-off-Kontrollerelease by SLA
Sauberer Bestandconfirmed moves

Bevor Sie eine Pickliste erstellen: Legen Sie fest, was die Liste steuern soll

A weak pick list is just a shopping list for the warehouse. A strong WMS pick list is a release rule, a route, an accuracy check and a feedback loop for inventory.

Auftragsfreigabe

Only release orders that are paid, in stock, not blocked by fraud checks, and still realistic for the promised carrier cutoff.

Lagerplatzdaten

Every pick line needs a default bin, shelf or zone. If a SKU has reserve and pick-face stock, the list must show which location the picker should use first.

Prüfpunkte

Decide whether the picker scans the order, location, SKU, quantity, tote and parcel. More scan points are useful only when they prevent a real error.

Practical rule: if your team still edits pick lists by hand after printing, the WMS is not controlling the work yet. Fix the release logic before adding more people to the warehouse floor.

Schritt für Schritt: eine WMS-Pickliste für einen aktiven E-Commerce-Betrieb erstellen

Use this procedure when moving from Shopify exports, WooCommerce plugins, printed packing slips or staff memory to a controlled ChannelDock WMS process.

Analysieren Sie Ihre Aufträge, bevor Sie sie gruppieren

Pull the last two weeks of orders and separate them by line count, SKU overlap, parcel size, marketplace SLA and carrier. Single-line orders, multi-line orders, fragile products and B2B replenishment orders should not always share one picking method.

Common mistake: copying a generic pick-list template without checking whether your own orders are mostly singles, kits, variants, or mixed baskets.

Wählen Sie den Picklistentyp für die Schicht

Use single-order picking when accuracy and training matter more than speed. Use batch picking when many orders share SKUs. Use wave picking when carrier cutoffs or marketplace SLAs drive the day. Use zone picking only when the warehouse is big enough that one person should not walk every aisle.

Common mistake: forcing every order into batches. Batch picking saves walking, but it creates sorting risk if the packing bench is not ready.

Freigaberegeln in ChannelDock festlegen

In Pick List settings, define which orders can enter the list: paid status, warehouse, channel, shipping method, order tag, deadline, stock availability and manual holds. Keep blocked orders out of the walk before they waste time.

Common mistake: printing everything open, including backorders, marketplace exceptions and orders waiting for customer service.

Sortieren Sie nach Lagerplatz, nicht nach Auftragsnummer

A picker should move through the warehouse in a logical path: aisle, rack, shelf, bin. If you use walking routes, the pick list should follow that route and show quantities at each stop.

Common mistake: sorting by order time, which sends the same picker past the same shelf again and again.

Zeigen Sie nur die Felder, die Picker wirklich brauchen

Show SKU, barcode or EAN, product image, variant, bin location, quantity, order or tote reference and warning notes. Hide fields that belong at packing, such as customer message details, unless they change the pick decision.

Common mistake: overcrowding the list with marketplace data while the picker still cannot see the bin or variant clearly.

Verbinden Sie Barcode-Prüfungen mit der Liste

When the picker reaches a location, scan the bin or SKU with Barcode Scanning. The scan should confirm the exact item and quantity before the product enters the tote or cart.

Common mistake: using barcodes only at the packing station. That catches some errors late, but it does not show where the error started.

Übergeben Sie gepickte Artikel in einen kontrollierten Packprozess

The pick list ends only when the correct tote, order or parcel is ready for Pick & Pack. At the bench, scan the order again, verify all lines, print the label and keep exceptions visible.

Common mistake: treating picking and packing as separate truths. If the packer cannot see what was scanned during picking, they repeat work or miss errors.

Messen Sie die Liste nach jeder Schicht

Track picked lines per hour, walked metres where possible, mis-picks, stock exceptions, label reprints, orders missed by cutoff and orders removed from the list. Use those numbers to adjust batch size and release rules.

Common mistake: celebrating a faster walk while customer service handles more wrong-item tickets the next day.

Die Entscheidungslogik hinter einer guten Pickliste

Competitor guides from Picqer, Shopify apps, ShipHero, Logiwa and general WMS publishers usually stop at “create a list and start picking.” That is useful, but incomplete. The better question is: should this order be on this list, for this picker, before this cutoff?

A pick list should reduce choices on the warehouse floor, not move planning decisions from the system to the picker.

Freigegebene Aufträge
Pickmethode
Routen order
Scan-Nachweis

Typische Picklistenfehler von Onlinehändlern

  • Using one printed list for every channel, even though bol.com, Amazon, Shopify, wholesale and manual orders have different deadlines and exception rules.
  • Leaving substitute SKUs, bundles and split shipments undefined, so pickers invent workarounds during the walk.
  • Putting product names first when the warehouse thinks in locations, barcodes and images.
  • Making batch sizes too large for the packing bench, which moves congestion from the aisle to the table.
  • Failing to update stock immediately after a confirmed pick, creating oversell risk on connected marketplaces.

Manuelle Pickliste vs. ChannelDock-WMS-Pickliste

A spreadsheet can be acceptable at ten orders per day. At fifty orders, the hidden cost is not the paper; it is the decisions the paper cannot enforce.

Manuelle oder reine Webshop-Liste

  • Orders are printed even when stock, payment or support status is unclear.
  • Routens follow export order, not warehouse layout.
  • Wrong picks are discovered by the packer or customer.
  • Stock updates lag behind the actual pick.

ChannelDock-WMS-Liste

  • Only eligible orders enter the pick queue.
  • Lines are sorted by warehouse route, batch, zone or cutoff.
  • Barcode scans confirm products and locations before packing.
  • Stock movements feed back into connected channels.

Explore Pick List settings →

FAQ zu WMS-Picklisten

Start with eligible paid orders, choose a pick method, sort lines by warehouse location, show SKU and barcode fields, require scan verification, and connect the completed list to packing and label printing.

Use SKU, barcode or EAN, product image, variant, bin location, quantity, tote or order reference, shipping priority and exception notes. Keep customer-facing packing details for the packing slip, not the picking route.

Use single-order picking for low volume, new staff, expensive products or complex orders. Use batches when many orders share SKUs and your packing station can sort them safely.

They can help at low order volume, but they usually do not govern multichannel stock, marketplace SLAs, warehouse routes, barcode exceptions and packing handoff in one place. A WMS becomes useful when those decisions need control.

A WMS pick list reserves and confirms stock as orders move through the warehouse. When connected to stock-level sync, the confirmed movement can update marketplaces and webshops faster than manual reconciliation.

A pick list guides warehouse staff to collect products. A packing slip is customer-facing proof of what is inside the parcel. Do not use one document for both jobs once order volume grows.

Verwandte Workflows als nächstes optimieren

Pick lists work best when the surrounding WMS workflows use the same stock and order truth.

Pick & Pack

Turn picked items into verified parcels.

Mehr erfahren

Batches

Gruppieren orders without losing accuracy.

Mehr erfahren

Walking routes

Reduce repeated warehouse walks.

Mehr erfahren

Barcode scanning

Prüfen every SKU and location.

Mehr erfahren

Machen Sie jede Pickliste zu einem gesteuerten WMS-Workflow

Use ChannelDock to release the right orders, guide the route, scan the SKU and keep stock accurate across every sales channel.