HOW-TO · WMS

Cómo configurar etiquetas Zebra GK420D para un WMS ecommerce

La Zebra GK420D sigue apareciendo en almacenes ecommerce porque es una impresora térmica directa de 203 dpi fiable para etiquetas 4x6. El riesgo no suele estar en la impresora, sino entre el PDF del transportista, la mesa de packing, el pedido en el WMS y la persona que reimprime con prisa. Con Label Printers de ChannelDock, la ruta de impresión forma parte del flujo de almacén.

Instala
driver + cola limpia
Calibra
etiquetas 4x6 antes del pico
Enruta
pedidos a la mesa correcta
Zebra GK420D bench check203 dpi
4 × 6Carrier label
Driver
4x6
WMS route

El tema viene del competitor gap semanal: Picqer consigue visibilidad con contenido sobre Zebra GK420D y PrintNode. Muchas páginas explican la instalación, pero pocas la conectan con controles WMS como mesas de packing, reimpresiones, evidencia de tracking y excepciones del transportista.

4x6 firstcarrier output
203 dpishipping labels
Reprint controlaudit trail
Bench routingprinter per flow

Antes de empezar: qué necesitas

El despliegue es más sencillo cuando hardware, sistema operativo, formatos de transportista y permisos del WMS están listos antes del primer envío real.

Zebra GK420D

USB/network, power, driver, direct-thermal 4x6 labels.

Carrier format

4x6/A6, PDF, ZPL/EPL or browser output.

WMS access

Printer rights, Manual Shipment and reprints.

Test with real carrier labels, not only an operating-system test page.

Paso a paso: configurar impresión Zebra GK420D

Usa este proceso para imprimir etiquetas desde el WMS sin duplicados, códigos de barras cortados ni tracking suelto.

Map the printer to a packing flow

Use the printer at the bench where labels are needed after Pick & Pack.

Do not share one unclear printer queue across all packers.

Install the driver and name the queue

Use a clear queue name such as PACK-01-Zebra-4x6 and remove obsolete queues.

Old duplicate queues cause wrong-printer mistakes.

Save the correct label size

Set 4x6 or A6 and check scaling/orientation before production.

A4 PDFs on thermal labels often crop the barcode.

Calibrate with the actual roll

Calibrate when label stock changes so the printer knows the start and end of each label.

Skipping calibration creates blanks, skips and half labels.

Connect the printer in ChannelDock

Add the route in Label Printers and keep shipping labels separate from A4 packing slips.

Document which orders use which printer.

Run a five-label test

Print domestic, international, marketplace, reprint and held-order examples.

One good first label does not prove the queue is stable.

Define reprint and void rules

Make the valid tracking number clear in order history.

Never create a second live label without marking the first attempt.

El flujo seguro de impresión

Una buena configuración Zebra no es una instalación aislada. Es una cadena desde el pedido verificado hasta la cola de impresión y la confirmación de tracking.

Trata cada etiqueta como evidencia operativa: demuestra qué paquete, servicio y número de seguimiento pertenecían al pedido.

Verify order
Carrier label
Zebra queue
Tracking

Errores comunes con Zebra GK420D

  • Wrong browser scaling or orientation.
  • No calibration after changing rolls.
  • Carrier portal tracking differs from WMS tracking.
  • Printer is too far from the packing bench.
  • Silent reprints during peak dispatch.

Impresora de escritorio vs. impresión controlada por WMS

A WMS-controlled setup keeps labels, orders and tracking auditable.

Without ChannelDock

  • Labels come from separate carrier tabs.
  • Operators choose printers manually.
  • Reprints and tracking mismatches are hard to audit.

With ChannelDock

  • Printer routing sits next to order and shipment settings.
  • Shipments & Labels connects to the packing flow.
  • Exceptions remain visible in order history.

Explore Label Printers →

FAQ sobre impresión Zebra GK420D

Install driver, set 4x6/A6, calibrate, print real carrier tests, then connect the route in the WMS.

For most 4x6 shipping labels, yes, if the label is printed at the correct size.

Usually wrong size, orientation, scaling, A4-to-4x6 conversion or calibration.

A PrintNode-style route is useful for direct bench printing, but it still needs a clean queue and tests.

Define when to reprint, void and record the valid tracking number.

Flujos relacionados para mejorar después

Improve the workflows around the printer next.

Label Printers

Printer routing.

Open feature

Shipping Rules

Carrier choice.

Learn more

Barcode scanning

Parcel checks.

Learn more

Packing slips

Document separation.

Learn more

Convierte la impresión Zebra en parte del control WMS

Usa ChannelDock para conectar impresoras, etiquetas, verificaciones de packing y tracking antes de que el pedido salga del almacén.