HOW-TO · FULFILLMENT

How to receive inbound deliveries for 3PL clients

Inbound receiving is where a 3PL either creates inventory trust or creates the first dispute of the month. This workflow shows fulfillment centers how to turn client ASNs, dock appointments, barcode checks, photos and putaway into a controlled process with ChannelDock’s Inbound Deliveries feature.

Plan
ASN, dock window, labor
Verify
scan, count, photograph
Release
putaway and availability
Inbound control boardScanned
Dock appointment09:30
ASN expected42 cartons
Exception photos3 attached
Putaway statusB-14 ready
Client ASN → dock scan → discrepancy proof → stock release

Why this matters: most receiving guides explain unloading and counting. Multi-client 3PLs need a stricter control loop because every receiving mistake becomes a client trust issue, a billing question or a marketplace stockout.

Dock-to-stockmeasure from arrival to available stock
98–99.5%inventory accuracy target range in 3PL KPI guides
ASN firstexpected stock before the truck arrives
Proof trailphotos, counts and exception notes

Before you start: receiving prerequisites

A clean inbound flow starts before the pallet reaches the dock. Ask each fulfillment client to send structured inbound data, agree on discrepancy rules, and label cartons in a way your warehouse team can scan without guessing.

ASN or inbound request

Collect SKU, barcode, quantity, carton count, lot or serial data, expected arrival date, carrier, tracking and special handling before the delivery is accepted.

Client receiving rules

Define overage, shortage, damage, unknown SKU, expiry date, quarantine and photo requirements per client. Link exceptions to Seller Collaboration so the client sees the same proof.

Putaway capacity

Reserve receiving space, staging lanes, bins and staff before the truck arrives. If the receiving zone is full, even a perfect ASN will wait in limbo.

Practical rule: do not treat receiving as “count now, fix data later.” In a 3PL, the first count is the legal and commercial memory of what the client handed over.

Step-by-step: receive inbound deliveries for 3PL clients

Use this process when your fulfillment center receives pallets, cartons or mixed-SKU shipments from multiple ecommerce brands and needs fast dock-to-stock without losing proof.

Create the inbound delivery from the client ASN

Open the inbound delivery in ChannelDock with the client, expected SKUs, quantities, carton count, shipment reference, carrier and planned arrival window. If the client cannot provide an ASN, create a minimum inbound request and mark it as “unverified” so the team knows the receiving risk before unloading.

Common mistake: accepting unannounced stock and trying to identify products after they are mixed with another client’s goods.

Book the dock window and reserve staging space

Match the inbound volume to a dock door, staging lane and receiving team. A 12-carton replenishment can be processed between outbound waves; a mixed-SKU pallet or container needs a blocked slot, empty floor space and a putaway plan.

Common mistake: scheduling by truck arrival only. Dock-to-stock depends on the people, scanners, bins and space available after unloading.

Scan the first physical identifier before unloading fully

Scan the pallet label, carton label, purchase order reference or tracking barcode and match it to the inbound delivery. If the shipment cannot be matched, keep it in a quarantine lane until a client, SKU or reference is confirmed.

Common mistake: moving unknown cartons into normal receiving because “we will find out later.” That is how ghost stock starts.

Count by SKU, carton and condition

Use barcode scanning where possible, and record each SKU against expected quantity, actual quantity, damaged quantity, expiry or lot details and serial numbers. For high-value or disputed clients, use a blind count so the receiver does not unconsciously count toward the expected number.

Common mistake: recording only total cartons. Carton count proves freight arrived; SKU count proves sellable inventory exists.

Capture discrepancy proof while the stock is still at the dock

Attach photos for damaged cartons, broken seals, missing labels, wrong EANs, expiry conflicts, overages and shortages. Add notes while the evidence is visible, not after the team has moved the goods to storage.

Common mistake: sending the client a shortage email without photos, timestamps or the original ASN context. That creates avoidable disputes.

Decide what is released, blocked or quarantined

Separate available stock from damaged, unknown, expired, sample, return-to-sender or client-approval stock. Update the inbound delivery status so downstream order routing and inventory availability do not use stock that is not actually pickable.

Common mistake: making the full receipt available before quality control is complete, which causes overselling and manual order holds.

Put away with location discipline

Move released units to the right warehouse section, bin or bulk location and scan the final location. Keep client ownership, batch, expiry and storage class attached to the stock movement. This connects receiving to later picking, cycle counting and billing.

Common mistake: using a temporary floor location that never gets cleared from the system.

Notify the client with a structured receiving summary

Send a summary through the client workspace: expected versus received, available versus blocked, discrepancy photos, next actions and estimated release time. If a decision is needed, route it as a task with an owner and deadline in Tasks & Calendar.

Common mistake: closing the receipt internally while the client still has no clear answer about missing or damaged stock.

The inbound control loop

Receiving becomes scalable when every inbound delivery follows the same loop: expected data, dock proof, stock decision, putaway and client visibility. The goal is not only faster unloading; it is a trustworthy inventory event.

For a 3PL, the receiving dock is the first place where operational accuracy becomes client confidence.

ASN
Dock scan
Proof
Putaway

Common inbound receiving pitfalls

  • Accepting shipments without an ASN, carton list or minimum inbound request.
  • Counting cartons but not confirming SKU, barcode, condition, expiry or serial detail.
  • Mixing client stock in a shared staging lane before ownership is verified.
  • Making stock available before damaged or unknown units are separated.
  • Handling discrepancies by email instead of linking photos, counts and client decisions to the inbound record.

Manual receiving vs. ChannelDock Inbound Deliveries

Spreadsheets can describe what should arrive. They struggle to prove what actually arrived, where it went and which client decision is still open.

Without ChannelDock

  • Clients email ASNs, packing lists and corrections in separate threads.
  • Receivers count on paper, then someone retypes results into inventory later.
  • Discrepancy proof sits in phone photos, WhatsApp messages or account-manager notes.
  • Available stock is updated late, causing overselling or unnecessary reorder panic.

With ChannelDock

  • Inbound deliveries connect expected stock, dock checks, discrepancy proof and putaway in one workflow.
  • Barcode scanning updates the receiving record while the stock is still physically in front of the team.
  • Clients can see structured receiving outcomes through collaboration instead of chasing screenshots.
  • Released stock becomes available for pick, pack and shipping only after the right checks are complete.

Explore Inbound Deliveries →

Inbound delivery receiving FAQ

Create an inbound delivery from the client ASN, book the dock window, scan the physical shipment, count SKU-level quantities, capture discrepancy proof, separate available and blocked stock, put away by location, and notify the client with a structured summary.

An ASN, or advance shipping notice, tells the warehouse what a client expects to send before it arrives: SKUs, quantities, cartons, shipment reference, carrier, tracking and planned arrival date. It lets the 3PL plan labor, space and verification.

Record expected versus actual quantity, attach photos, note damaged or missing identifiers, quarantine affected stock, and ask the client for a decision before releasing disputed units. The proof should stay linked to the inbound delivery record.

Only after SKU count, condition check, quarantine decision and putaway location are complete. Damaged, unknown, expired or client-approval stock should stay blocked until the next action is clear.

Track dock-to-stock time, receiving accuracy, discrepancy rate, percentage of unannounced shipments, putaway completion time, damaged-stock rate and client decision time for blocked goods.

ChannelDock Inbound Deliveries is the starting point. Combine it with Seller Collaboration, stock locations, task calendar, barcode scanning and fulfillment-center analytics for a complete receiving control loop.

Related how-tos to improve next

Once receiving is controlled, tighten the warehouse flows that depend on clean inbound stock.

Organize bin locations

Put away stock where pickers and counters can trust it.

Read how-to

Do warehouse stock counts

Catch receiving drift before it becomes overselling.

Read how-to

Manage returns dock

Keep returned stock separate from new inbound stock.

Read how-to

Build a client portal

Show receiving outcomes without exposing internal screens.

Read how-to

Receive client stock with proof, speed and control

Use ChannelDock Inbound Deliveries to connect ASNs, dock scans, discrepancy photos, putaway and client updates in one 3PL receiving workflow.